{
  "alerts": {
    "active_title": "{count} active drive alert(s)",
    "collector_error": "Drive monitoring could not refresh: {error}",
    "collector_title": "Drive Health collector problem",
    "command_timeout": "{drive} recorded {count} new command timeout event(s) since the previous scan.",
    "critical_temperature_time_increase": "{drive} accumulated {count} new minute(s) above its critical temperature.",
    "dismiss": "Dismiss alert",
    "dismiss_all": "Dismiss all",
    "drive_missing": "{drive} has been missing for {count} consecutive scans.",
    "drive_title": "SMART alert: {drive}",
    "error_log_increase": "{drive} recorded {count} new SMART error-log entry or entries.",
    "health_failed": "{drive} reports a failed SMART health check.",
    "interface_crc": "{drive} recorded {count} new interface CRC error(s) since the previous scan; check its data cable and connectors.",
    "life_critical": "{drive} has critically low endurance: {remaining}% remaining.",
    "life_warning": "{drive} has only {remaining}% estimated endurance remaining.",
    "media_errors": "{drive} recorded {count} new media/data integrity error(s) since the previous scan.",
    "nvme_critical": "{drive} reports NVMe critical-warning flags {value}.",
    "pending": "{drive} recorded {count} new pending sector(s) since the previous scan.",
    "reallocated": "{drive} recorded {count} newly reallocated sector(s) since the previous scan.",
    "recovered_body": "No longer active: {issue}",
    "recovered_title": "SMART issue recovered: {drive}",
    "self_test_failed": "{drive} reports a failed SMART self-test: {status}.",
    "smart_unavailable": "Full SMART data is unavailable for {drive}.",
    "spare_low": "{drive} has only {spare}% spare capacity remaining.",
    "spin_retry": "{drive} recorded {count} new spindle spin retry event(s) since the previous scan.",
    "storage_critical": "{drive} mounted storage is critically full at {used}%.",
    "storage_warning": "{drive} mounted storage is {used}% full.",
    "temperature_cooling": "{drive} is cooling at {temperature} °C; the alert clears below {threshold} °C.",
    "temperature_critical": "{drive} is at {temperature} °C (critical threshold: {threshold} °C).",
    "temperature_warning": "{drive} is at {temperature} °C (warning threshold: {threshold} °C).",
    "test_body": "Notifications are working. This is only a test; no drive issue was created.",
    "test_title": "Drive Health alert test",
    "uncorrectable": "{drive} recorded {count} new uncorrectable error(s) since the previous scan.",
    "unknown_drive": "Unknown drive",
    "unsafe_shutdown_increase": "{drive} recorded {count} new unsafe shutdown(s) since the previous scan.",
    "warning_temperature_time_increase": "{drive} accumulated {count} new minute(s) above its warning temperature."
  },
  "collector": {
    "action_install": "install or upgrade the collector",
    "action_pause": "pause the collector",
    "action_remove": "remove the collector",
    "action_start": "start the collector",
    "basic_features": "Drive discovery, mounted folders, storage use, and temperatures exposed by Linux.",
    "basic_title": "Basic monitoring — no elevated service",
    "copy_install": "Copy command",
    "full_features": "Reliable health, endurance, error counters, sensor details, and background self-test progress.",
    "full_title": "Full SMART — optional",
    "install": "Install collector",
    "interval": "Full SMART refresh: every {minutes} min",
    "interval_applied": "Full SMART refresh schedule updated.",
    "interval_authorizing": "Waiting for administrator approval to update the full SMART schedule…",
    "interval_cancelled": "Administrator approval was cancelled.",
    "interval_command_failed": "The administrator command did not complete.",
    "interval_failed": "Could not update the full SMART schedule: {error}",
    "interval_launch_failed": "Could not open the administrator authorization dialog.",
    "interval_timeout": "Administrator approval timed out. Try again when you are ready to approve it.",
    "open_settings": "Open Plugins page",
    "pause": "Pause service",
    "pause_terminal_opened": "A terminal opened. Review the command and approve sudo to stop the collector timer.",
    "remove": "Remove collector",
    "remove_confirm": "Click Remove collector again to request authorization for the explicit uninstall action.",
    "settings_hint": "Enable or disable Full SMART from Settings → Plugins → Drive Health. All privileged actions use the desktop authorization dialog.",
    "settings_opened": "Opened the Plugins page. Select the gear on Drive Health to change its settings.",
    "settings_title": "Collector settings",
    "start": "Start collector",
    "start_terminal_opened": "A terminal opened. Review the command and approve sudo to enable and refresh the collector.",
    "status_disabled": "Basic mode is active; the optional system collector is not being used.",
    "status_healthy": "Collector {version} is installed and refreshing full SMART data.",
    "status_not_installed": "Install the read-only collector to unlock full SMART data.",
    "status_stale": "The collector is installed, but its cache is stale or unavailable.",
    "status_upgrade_required": "Collector {version} is outdated; upgrade to the bundled version.",
    "stop_service": "Stop background service",
    "terminal_opened": "A terminal opened. Review the command and approve sudo to install or upgrade.",
    "title": "System collector",
    "uninstall_terminal_opened": "A terminal opened. Review the removal command and approve sudo to continue.",
    "update_body": "Full SMART is enabled. Update collector {current} to {expected} from the Drive Health panel to keep all features working.",
    "update_title": "Drive Health collector update available",
    "upgrade": "Upgrade collector"
  },
  "common": {
    "duration_days": "{value} d",
    "duration_hours": "{value} h",
    "duration_years": "{value} y",
    "never": "never",
    "not_available": "N/A",
    "unknown": "unknown"
  },
  "dependencies": {
    "action_install": "install dependencies",
    "alert_body": "Install the missing dependencies to enable complete monitoring: {missing}. Open the Drive Health panel to review the command.",
    "alert_title": "Drive Health setup required",
    "collection_blocked": "Drive collection is paused because required commands are missing: {missing}",
    "command": "Suggested {manager} command",
    "copied": "Installation command copied.",
    "copy_command": "Copy command",
    "install": "Install",
    "install_body": "The desktop administrator authorization dialog will request approval before installing the required packages.",
    "install_title": "Install dependencies",
    "manual_install": "No supported package manager with desktop authorization was detected. Install the listed commands manually, then recheck.",
    "missing": "Missing commands: {missing}",
    "package_manager": "package manager",
    "recheck": "Recheck",
    "title": "Required dependencies are missing"
  },
  "health": {
    "failed": "Failed",
    "passed": "Healthy",
    "unknown": "Unknown"
  },
  "history": {
    "hotspot": "Hotspot temperature",
    "life": "Life remaining",
    "samples": "{count} samples",
    "title": "Drive health trends"
  },
  "metrics": {
    "available_spare": "Available spare",
    "command_timeout_count": "Command timeouts",
    "critical_warning": "Critical warning",
    "data_read": "Data read",
    "data_written": "Data written",
    "device_temperature_limits": "Firmware limits (warning / critical)",
    "endurance_used": "Endurance used",
    "error_log_entries": "Error-log entries",
    "hotspot_and_composite": "{hotspot} · {composite} composite",
    "hotspot_temperature": "Hotspot",
    "interface_crc_errors": "Interface CRC errors",
    "life_remaining": "Life remaining",
    "life_remaining_estimated": "Life remaining (estimated)",
    "load_cycle_count": "Head load cycles",
    "media_errors": "Media errors",
    "mounted_at": "Mounted at: {paths}",
    "pending": "Pending sectors",
    "power_cycles": "Power cycles",
    "power_on": "Power-on time",
    "reallocated": "Reallocated sectors",
    "serial": "Serial: {value}",
    "smart_health": "SMART health",
    "spin_retry_count": "Spin retry count",
    "start_stop_count": "Start/stop cycles",
    "storage_used": "Storage used",
    "temperature": "Temperature",
    "temperature_sensors": "Temperature sensors",
    "uncorrectable": "Uncorrectable errors",
    "unsafe_shutdowns": "Unsafe shutdowns"
  },
  "panel": {
    "collapse": "Hide drive details",
    "expand": "Show drive details",
    "no_drives": "No supported drives were discovered.",
    "refreshing": "Refreshing SMART data…",
    "title": "Drive Health",
    "updated": "Updated {time}",
    "waiting": "Waiting for the first drive scan…"
  },
  "preferences": {
    "alerts": "Health alerts",
    "alias": "Display name",
    "critical_temperature": "Critical °C",
    "edit": "Customize drive",
    "hidden_drives": "Hidden drives",
    "hide": "Hide drive",
    "invalid_thresholds": "Enter numeric thresholds and keep critical temperature above warning temperature.",
    "life_warning": "Life warning %",
    "move_down": "Move drive down",
    "move_up": "Move drive up",
    "presence": "Missing-drive alerts",
    "restore": "Restore",
    "save": "Save",
    "save_failed": "Drive preferences could not be saved.",
    "saved": "Drive preferences saved.",
    "title": "Drive preferences",
    "warning_temperature": "Warning °C"
  },
  "privileged_action": {
    "authorizing": "Waiting for administrator approval to {action}…",
    "cancelled": "Administrator approval was cancelled.",
    "command_failed": "The administrator command did not complete.",
    "completed": "Completed: {action}.",
    "failed": "Could not {action}: {error}",
    "launch_failed": "Could not open the administrator authorization dialog.",
    "timeout": "Administrator approval timed out. Try again when you are ready to approve it."
  },
  "self_test": {
    "authorization_cancelled": "Administrator approval was cancelled.",
    "authorization_required": "Polkit (pkexec) is required for background self-tests. Install your distribution's polkit package.",
    "authorization_timeout": "Administrator approval timed out. Try again when you are ready to approve it.",
    "authorizing": "Waiting for administrator approval…",
    "cancel": "Cancel",
    "confirm": "Start a {type} SMART self-test in the background? Your desktop will request administrator approval.",
    "confirm_action": "Authorize and start",
    "helper_required": "Install or upgrade the system collector to enable explicitly approved self-tests.",
    "in_progress": "Self-test in progress",
    "launch_failed": "The background self-test could not be started.",
    "log_failure": "The SMART self-test log contains a relevant failed test.",
    "log_unavailable": "Self-test log unavailable",
    "long": "Extended test",
    "none_recorded": "No self-test recorded",
    "progress": "Test progress",
    "short": "Short test",
    "started_background": "The self-test is running in the background. Progress and the final result will update here.",
    "starting": "Request accepted; waiting for the drive to report progress…",
    "title": "SMART self-test",
    "unavailable": "Self-test information unavailable"
  },
  "settings": {
    "alert_hdd": {
      "description": "Evaluate rotational disks for temperature, SMART health, sector, spindle, timeout, and interface alerts.",
      "label": "Alert on hard drives"
    },
    "alerts_enabled": {
      "description": "Notify when a new drive issue appears or an existing issue worsens.",
      "label": "Desktop alerts"
    },
    "critical_temperature": {
      "description": "Temperature in °C that changes a drive to critical color.",
      "label": "Critical temperature"
    },
    "drive_missing_alerts": {
      "description": "Warn when an established internal drive disappears for several scans.",
      "label": "Missing-drive alerts"
    },
    "full_smart_refresh_minutes": {
      "description": "Minutes between privileged full SMART reads. Default: 15 minutes. Change the value here, then use Apply schedule in the collector controls and approve the administrator prompt.",
      "label": "Full SMART refresh interval"
    },
    "history_interval_minutes": {
      "description": "Minutes between persisted temperature and endurance samples.",
      "label": "History sample interval"
    },
    "history_retention_days": {
      "description": "Days of bounded drive trend history to retain.",
      "label": "History retention"
    },
    "life_warning_percent": {
      "description": "Remaining SSD life percentage that triggers a warning.",
      "label": "Endurance warning"
    },
    "missing_grace_scans": {
      "description": "Consecutive successful scans a drive may be absent before an alert appears.",
      "label": "Missing-drive grace scans"
    },
    "notify_recovery": {
      "description": "Notify when a previously active drive issue clears.",
      "label": "Recovery notifications"
    },
    "refresh_seconds": {
      "description": "Seconds between lightweight plugin refreshes for drive inventory, mounts, and available sysfs temperatures.",
      "label": "Refresh interval"
    },
    "show_hdd": {
      "description": "Display rotational disks with HDD-specific health and integrity information.",
      "label": "Show hard drives"
    },
    "system_collector_enabled": {
      "description": "Use the separately authorized read-only system collector for reliable health, endurance, error counters, sensor details, and self-test progress. Turning this off ignores its cache but does not stop an installed timer; stop it from the Drive Health collector controls.",
      "label": "Full SMART collector (optional)"
    },
    "use_hotspot_temperature": {
      "description": "Use the hottest valid NVMe sensor for summary colors and temperature alerts.",
      "label": "Use hottest sensor"
    },
    "warning_temperature": {
      "description": "Temperature in °C that changes a drive to warning color.",
      "label": "Warning temperature"
    }
  },
  "smart": {
    "access_limited": "Temperature and storage are available; health and full SMART details require the read-only system collector.",
    "partial_body": "Full SMART details available for {available} of {total} drives.",
    "partial_details": "Core health is available, but at least one optional SMART section could not be read.",
    "partial_title": "Limited SMART access",
    "sleeping": "Drive is sleeping; SMART checks were skipped to avoid spinning it up."
  },
  "storage": {
    "not_mounted": "Not mounted"
  },
  "summary": {
    "drive_mix": "{ssds} SSD · {hdds} HDD",
    "drives": "Drives",
    "hottest": "Hottest",
    "lowest_ssd_life": "Lowest SSD life"
  },
  "widget": {
    "active_alerts": "{count} active SMART alert(s)",
    "loading": "Loading drive health…",
    "no_alerts": "No active alerts",
    "smart_unavailable": "Full SMART access unavailable for {count} drive(s)",
    "tooltip": "{count} drives ({ssds} SSD, {hdds} HDD) • hottest {temperature} • lowest SSD life {remaining}"
  }
}